NintendoEntertainmentSystem Emulation on ESP32 and ILI9341
#HW and Housing assembly
#Flashing the Software ##1. Open ESPFlashDownloadTool_vXYZ.exe (Download Link: https://www.espressif.com/sites/default/files/tools/flash_download_tools_v3.6.4_0.rar) !!!If you work with mingw and esp idf and you get problems after using the ESPFlashTool (in my case, make doesn't work) go to!!! !!!the msys32 directory (<-"root" of msys/mingw) and run the autorebase.bat script...for me, after this everything works fine!!! ##2. Choose Button "ESP32 DownloadTool" ##3. Choose files to upload (Box with |...|) write adress to flash behind the @ first file bootloader.bin 0x1000 second file partitions.bin 0x8000 3. file nesemu.bin 0x10000 4. file roms.txt 0x68000 !you've to change the file according your needs - otherwise you can only choose 3 roms! 5. file yourRom.nes 0x69000 !make sure the roms are not greater than the partition-size. 6. file yourNextRom.nes 0x..... 7. file yourNextRom2.nes 0x..... . . .
Flash the Roms to this Adresses
No. Adress Size(up to...KB)
rom01 0x69000 100
rom02 0x82000 260
rom03 0xc3000 388
rom04 0x124000 132
rom05 0x145000 260
rom06 0x186000 100
rom07 0x19f000 100
rom08 0x1b8000 100
rom09 0x1d1000 772
rom10 0x292000 516
rom11 0x313000 296
rom12 0x35d000 260
rom13 0x39e000 260
rom14 0x3df000 132
##4. Choose the following Settings
SPI SPEED: 40MHz
SPI MODE: DIO
FLASH SIZE: 32Mbit(=4MB)
COM: can be found in Device Manager
##5. Press "Start", when finished "Stop" After a Reset/Restart(dis-reconnect the USB) the Emulator works